Short answer: A bid cap sets the most Meta can bid for a result in any single auction. It is not a promise about your CPA, which is simply your spend divided by your purchases. Your actual CPA can land below your bid or above it, depending on which auctions you win and how many of them turn into sales. Start your bid cap from a comparable campaign's real results and above its reported CPA, then adjust after the first day based on delivery and cost.
The bid examples and the starting point in this article come from Meta's Amplified Budget Strategy guidance. The judgment calls on adjusting are ours. Meta changes setting names over time, so check the current bid strategy options in Ads Manager. The brands in the examples are made up.
What is a bid cap on Meta?
A bid cap is a bid strategy where you set the maximum Meta is allowed to bid for your chosen result, like a purchase, in each auction.
You set it at the Ad Set level. Meta's auction will only compete at or below that number. Any auction that would need a higher bid is off limits.
What a bid cap does not do is control your average cost per purchase. It controls the price of entry to each auction, not what happens after you get in.
This is different from a cost cap. A cost cap aims for an average cost per result over time and lets some single results cost more as long as the average holds. A bid cap is a hard limit on each bid. Our Graveyard campaign article compares the two in more detail, since we use both there to keep expensive ads in check.
Why isn't a bid the same as a CPA?
Because a bid gets you into an auction, and winning an auction is not the same as making a sale.
CPA (cost per acquisition) is your total spend divided by the number of purchases. It depends on two things: what you paid in the auctions you won, and how many of those wins turned into purchases.
Meta's guidance uses two simple examples to show this. They are simplified on purpose, since in real life it takes many ad views to get one sale, but the logic holds.
| Example A | Example B | |
|---|---|---|
| Bid | $100 | $120 |
| Auctions won | 3 | 5 |
| Average price paid per auction | $80 | $85 |
| Total spend | $240 | $425 |
| Purchases | 2 | 5 |
| CPA | $120 | $85 |
In Example A, the bid was $100 but the CPA came out at $120, above the bid, because one of the three wins didn't turn into a sale.
In Example B, the bid was higher at $120, but the CPA came out at $85. The higher bid let the campaign win more auctions, and more of them turned into sales.
Two lessons come out of this:
- Your CPA can land above your bid cap. A bid cap is not a ceiling on what each sale costs you.
- A higher bid does not always mean a higher CPA. It can open up better auctions with people more likely to buy.
What is the golden rule for setting a bid cap?
Meta's guidance boils it down to one choice. Decide which you would rather have:
- Little or no spend at an efficient CAC. Set a more conservative bid. You will get fewer sales, but the ones you get will be cheap.
- More volume at a more variable CAC. Set a more liberal bid. You will buy more, but cost per customer will move around more.
CAC (customer acquisition cost) is what you pay to win one new customer. There is no right answer here. It depends on your margin, your cash and your goal for the period. A brand clearing old stock before a new season might want volume. A brand with thin margin might want efficiency and accept a quiet campaign.
What does not work is wanting both at once and setting the bid at exactly your goal CPA. That usually lands you in the first bucket by accident.
Where should you start your bid cap?
Start from a comparable business as usual campaign, meaning one of your normal everyday campaigns selling the same products to similar people, and set your first bid above its reported CPA.
Meta's guidance says to launch with reasonable bids above the CPA shown in Ads Manager. In Meta's example setup, which is built for large advertisers, the starting bid cap sits about 60% higher than the goal CPA.
Why start above? Because your reported CPA is an average. It is made up of some cheap sales and some expensive ones. If your bid sits at the average, you shut out every auction that would have cost more than that, including many that still lead to good sales. You end up with a small, overly picky campaign that tells you very little.
Here is an illustrative example. Clearbrook's goal CPA is $40. Its comparable BAU campaign reports a CPA of $36 over the last month. A bid cap at $36 or $40 would likely barely spend. Following the shape of Meta's example, a starting point closer to $64 (60% above the $40 goal) would let the campaign into enough auctions to learn something on day one. Clearbrook can then pull it down if costs run high.
Two things to check before you pick a number:
- Which attribution setting the reported CPA uses. A CPA read on 7 day click and 1 day view will look lower than one read on 1 day click. Our guide to Meta attribution windows explains the difference. Use the same setting for your goal and your read.
- Whether the comparable campaign really is comparable. A retargeting campaign's CPA is a poor guide for a broad prospecting campaign.
How do you adjust the bid cap after day one?
Meta's guidance says to adjust after the first day. Here is how we read what we see.
| What you see | What it usually means | What to do |
|---|---|---|
| Almost no spend | Your bid is below what the market will clear at | Raise the bid in small steps |
| Strong spend, CPA well over goal | Bid is too liberal for your margin | Lower the bid a step |
| Strong spend, CPA near or under goal | The bid is working | Leave it. Check the budget is still well above spend |
| Spend near the full budget | Pacing may be back in play | Raise the budget, keep the bid |
Some rules of thumb we follow:
- Move one thing at a time. If you change bid and budget on the same day, you won't know which one caused the result.
- Step, don't jump. Small changes tell you where spend starts and stops. That point is useful information about what sales cost in your account.
- Read delivery on day one, read CPA over a few days. Purchases often show up after the click, so one day of CPA is noisy. Day one tells you whether the bid lets you in. A few days tell you whether the sales are worth it.
- Write down every change and why. Bid changes are easy to forget and hard to reverse engineer later.
What are the most common bid cap mistakes?
- Setting the bid equal to goal CPA. The campaign barely spends and you conclude the strategy doesn't work.
- Treating the bid as a CPA guarantee. You see a CPA above the bid and assume something is broken. It isn't.
- Changing the bid every few hours. You never let a setting run long enough to learn what it does.
- Raising the budget when the bid is the problem. If a capped campaign isn't spending, budget is rarely the reason. The bid is.
- Copying someone else's bid. Your bid depends on your margin, your creative and your audience, not another brand's.
Key takeaways
- A bid cap limits the bid in each auction. It does not cap your CPA.
- CPA is spend divided by purchases, and it can land above or below your bid.
- Choose on purpose: conservative bid for efficient CAC and less spend, or liberal bid for more volume at a more variable CAC.
- Start from a comparable campaign's results and above its reported CPA. Meta's large advertiser example starts about 60% above goal CPA.
- Adjust after day one, one change at a time, in small steps.
FAQ
Can my CPA be higher than my bid cap? Yes. A bid cap limits what Meta bids per auction, not what each sale ends up costing. If you win several auctions and only some turn into purchases, your CPA can come out above your bid, as Meta's own example shows.
Why would a higher bid give me a lower CPA? A higher bid lets you into more auctions, including ones with people more likely to buy. If more of those wins turn into sales, your cost per sale can drop even though your bid went up.
Should I use a bid cap or a cost cap? A bid cap is stricter and gives you tighter control of each auction. A cost cap aims for an average and usually delivers more. Meta's Amplified Budget Strategy guidance uses a bid cap. For other uses, pick on purpose and know which one each campaign is built with.
How often should I change my bid cap? Look after the first day, then give each change a few days before judging cost. Changing it several times a day means you never learn what any setting does.
Sources: Meta's Amplified Budget Strategy guidance for advertisers.
Not sure your bids match your real costs?
We'll compare what your campaigns bid, what they pay and what customers are worth to you, for free. You get a full account audit plus net new reach and cumulative reach reports. Request it on our contact page.
Check what you learned
Tap an answer to see if you got it right.
1. Does a bid cap cap your CPA?
2. What does a conservative bid give you?
3. How should you adjust the bid?
Ready for the full test? Take the Media Buying exam and get certified. Want this run on your account? Get my free audit.
Module 1: Media Buying · article 17 of 19
Next: How to Set Up an Amplified Budget Campaign on Meta: Budget, Bid Cap, Safeguards and Breakouts
Previous: How Meta's Auction and Budget Pacing Work, and Why Inflated Budgets Remove Pacing
About the author
Jake Mehani, founder of Creative Analytics
Jake has spent 15 years running Meta and paid social ads for consumer brands. Meta published his RBX Active Advantage+ case study, he taught the DMAnc Meta and TikTok ads masterclass, and he spoke at Motion's 2024 Creative Strategy Summit. His senior team runs media buying, creative and measurement like an in house team.