Short answer: Build a Sales campaign with Advantage campaign budget turned on and the bid strategy set to bid cap. Set the campaign budget far above your normal daily spend so pacing switches off, start the bid cap above a comparable campaign's reported CPA, and use one broad Ad Set with an Ad Set spending limit. Load four to eight proven ads, a mix of static and video, and add at least one safeguard before you launch. Once it works, break it out by AOV, margin, category, prospecting vs retargeting or geo, each with its own bid.
This setup follows Meta's Amplified Budget Strategy guidance. The safeguards and breakouts also come from that guidance, and the judgment on how to use them is ours. Meta renames settings and moves options around, so check Meta's current setup in Ads Manager as you build. The brands in the examples are made up.
If you are new to the idea, start with what the Amplified Budget Strategy is and how pacing works.
What do you need before you start?
You need four things in place first:
- A goal CPA or CAC you trust. Know what a customer is worth and how far above your goal you can go for a few days.
- A comparable campaign. One of your business as usual (BAU) campaigns, selling the same products to similar people, with enough purchases to give you a real CPA.
- Healthy tracking. The bid is judged against the purchases Meta sees. Run a pixel and CAPI health check if you haven't lately.
- Proven creative. Ads that have already won in testing. This is not the place to test new ideas.
How do you set up an amplified budget campaign, step by step?
Meta's launch plan has six steps. Here they are, expanded with the settings from Meta's example setup.
- Find your starting bid. Pull the CPA of your comparable BAU campaign. Set your bid cap above it. Meta's example, built for large advertisers, starts about 60% above goal CPA, then adjusts after day one. Our guide on why a bid is not a CPA explains why you start high.
- Create the campaign. In Meta's example: Sales objective, a manual sales campaign, Advantage campaign budget on, and bid strategy set to bid cap (not cost cap and not a cost per result goal).
- Set the inflated budget. Set the campaign budget high enough to override the pacing multiplier. A rule of thumb some advertisers use is roughly five to six times your average daily spend; treat it as a starting point, not a Meta rule. Meta's large advertiser example uses $150,000 a day, with room to raise it toward $500,000 if pacing is not fully removed.
- Build one Ad Set. Broad targeting. Meta's example uses everyone 18 and older in the US. Put the bid cap here.
- Add an Ad Set spending limit. This is the upper limit the Ad Set can spend before it shuts off. It protects you from overspend while the high campaign budget still keeps pacing off. Meta's example suggests $2,000 to $5,000 a day for a large advertiser.
- Load the creative. Four to eight assets, mixing static and video. Meta's launch plan says four to six to start.
- Add a safeguard and launch. More on this below.
- Monitor, then adjust. Watch delivery on day one. Adjust bid, budget or spending limit one at a time, then scale what works.
Here is an illustrative example of scaling it down. Groundswell, a raised garden bed kit brand, averages $1,500 a day in total spend and has a goal CPA of $60.
| Setting | Groundswell (illustrative) |
|---|---|
| Campaign budget | $7,500 to $9,000 a day (five to six times average spend) |
| Bid cap | Starts above its BAU campaign's reported CPA, adjusted after day one |
| Ad Set | One, broad, US |
| Ad Set spending limit | An amount Groundswell could lose in one bad day without real harm |
| Creative | Five proven ads, three video and two static |
| Safeguard | Automated rule that pauses the campaign if CPM jumps past a set level |
What safeguards does every amplified budget campaign need?
At least one. With pacing removed, a bad bid or a tracking error can spend real money fast. The guidance lists several options, and we use them in layers.
| Safeguard | What it does | Watch out for |
|---|---|---|
| Ad Set spending limit | Caps what one Ad Set can spend before it stops | Set it too low and it acts like a budget again |
| Campaign spending limit | Caps total spend for the campaign | Once hit, the campaign stops until you raise it |
| Account spending limit | Caps spend for the whole ad account | It stops every campaign in the account, not just this one |
| Automated rule | Turns the campaign off if a metric moves past a line you set, such as CPMs rising by a set percentage | Make sure the rule checks often enough to matter |
CPM is cost per 1,000 impressions. A sudden jump in CPM often means the auction is getting crowded and expensive, which is exactly when a bid cap campaign with no pacing can overpay.
Jake's rule: no amplified budget campaign goes live without a spending limit or an automated rule, not even for a day.
What creative should go in it?
Your best proven ads, in a mix of formats.
This campaign buys more of the auctions you already know you can win, so it calls for ads that have already shown they sell. In our accounts, these come from the same pool we promote to the Scaling Campaign.
- Mix static and video. Meta's guidance calls for both. Different people respond to different formats, and a mix gives the system more ways to win each auction.
- Keep the count modest. Four to eight assets is enough. Too many splits spend across ads that each get too little to learn from.
- Keep it fresh. If the same ads have been running for months, fatigue can drag on results right when you are trying to buy more. A refresh before a big moment helps.
What are breakouts, and when should you use them?
Breakouts are separate Ad Sets, each with its own bid, for parts of your business that are worth different amounts to you. Meta's guidance lists five kinds.
| Breakout | How it works | Why the bid differs |
|---|---|---|
| Low vs high AOV | Split products by average order value. If there is no clean split, the guidance suggests treating products about 20% below your AOV as low AOV | A bigger order can support a higher bid |
| Margin | Ad Sets or product sets grouped by margin | Higher margin products can afford a higher CPA |
| Product category | Separate Ad Sets for your top three to five categories | Each category has its own real cost per sale |
| Prospecting vs retargeting | New people in one Ad Set, existing visitors or customers in another | The guidance says to bid higher for prospecting. Our read: new customers usually matter more to growth than repeat sales that might have happened anyway |
| Geo | Top markets vs under indexed markets | What a sale is worth, and what it costs, varies by place |
AOV (average order value) is your revenue divided by your number of orders.
Our advice: start with one broad Ad Set. Breakouts split your data, and each Ad Set needs enough purchases to judge its bid. Add a breakout once you have a clear reason one group deserves a different bid.
If you break out prospecting and retargeting, be careful with the retargeting side. A big budget pointed at people who were going to buy anyway can look great in Ads Manager and add little. Our article on whether remarketing is incremental covers how to check.
What should you check after launch?
On day one, check delivery. Is it spending? Is it hitting the spending limit? Are CPMs normal?
Over the following days, check cost: is CPA where you expected, is spend near the full budget (pacing may be back), and is it adding sales or pulling them from your BAU campaigns?
Our guide on when to use amplified budgets and how to judge them covers how to read the results over the full period.
Key takeaways
- Meta's setup: Sales objective, Advantage campaign budget on, bid strategy set to bid cap, one broad Ad Set.
- Set the budget at a clear multiple of normal spend so pacing switches off. Meta's $150,000 a day example is for large advertisers.
- Start the bid above a comparable campaign's reported CPA and adjust after day one.
- Every campaign needs at least one safeguard: a spending limit or an automated rule.
- Use proven ads only, in a mix of static and video.
- Add breakouts by AOV, margin, category, prospecting vs retargeting or geo once the single Ad Set has given you a read.
FAQ
Should I use an Advantage+ shopping campaign for this? Meta's example uses a manual sales campaign with a bid cap. Some advertisers report pairing Advantage+ shopping campaigns with cost caps and inflated budgets instead. Check what Meta currently offers and treat any variation as its own test.
What is the difference between a campaign budget and a spending limit? The budget tells Meta how much it may spend in a period and drives pacing. A spending limit is a hard stop. In this setup the budget is set high to switch pacing off, and the spending limit is what actually protects you.
How many Ad Sets should I start with? One. Breakouts split your purchases across Ad Sets, and each one needs enough data to judge its bid. Add them once you have a reason.
Can I put new, untested ads in it? We wouldn't. This campaign buys more of what already works. New ads belong in creative testing, where they are judged on their own.
Sources: Meta's Amplified Budget Strategy guidance for advertisers.
Want a second set of eyes before you launch?
We'll check your tracking, your real costs and where your spend is going, for free. You get a full account audit plus net new reach and cumulative reach reports. Request it on our contact page.
Check what you learned
Tap an answer to see if you got it right.
1. Which bid strategy does the setup use?
2. How many Ad Sets does Meta's setup use?
3. What must every amplified campaign have?
Ready for the full test? Take the Media Buying exam and get certified. Want this run on your account? Get my free audit.
Module 1: Media Buying · article 18 of 19
Next: When Should You Use Amplified Budgets, and How Do You Judge Them?
About the author
Jake Mehani, founder of Creative Analytics
Jake has spent 15 years running Meta and paid social ads for consumer brands. Meta published his RBX Active Advantage+ case study, he taught the DMAnc Meta and TikTok ads masterclass, and he spoke at Motion's 2024 Creative Strategy Summit. His senior team runs media buying, creative and measurement like an in house team.