Short answer: Turn off an ad when it has spent a set multiple of your own target CPA with zero sales, or when it sells but both its cost per customer and its return are below your goal. Turn off an Ad Set only when no ad inside it is still working, never on the Ad Set total alone. The numbers come from your account's economics, not from someone else's rule of thumb.
Most advice on this topic gives you a dollar figure. "Kill any ad at $50." "Give it three days." Those rules feel safe because they are simple, but they are borrowed from accounts that are not yours. A $50 cutoff is generous for a cheap snack and brutal for a product that costs a few hundred dollars. This article explains how we think about kill thresholds so you can build your own.
What is a kill threshold?
A kill threshold is the point at which an ad or Ad Set has had a fair chance to prove itself and the evidence says it will not, so you stop spending on it.
Two parts of that sentence matter. "A fair chance" means it spent enough that a good ad would usually have shown something. "The evidence says" means you are reading results, not a calendar. A kill threshold is not a timer. It is a point where the odds have turned.
Before we go further, three terms:
- CPA (cost per acquisition) is what you pay in ad spend for one purchase.
- CAC (customer acquisition cost) is what you pay for one new customer. In ecommerce it is often close to CPA for first orders.
- ROAS (return on ad spend) is revenue divided by ad spend.
Why can't you use one number for every account?
Because what counts as "enough spend" depends on what a customer is worth to you. The right threshold scales with your target CPA, your average order value and how long people take to decide.
Here is the problem with a fixed number. Imagine two accounts. One sells a product where a healthy CPA is small. The other sells a product where a healthy CPA is many times larger. A single dollar cutoff either kills good ads early in the second account or lets bad ads run far too long in the first.
The fix is to express your threshold as a multiple of your own target CPA. Jake's rule of thumb is to ask: "how much would a good ad usually need to spend before it shows a sale?" The answer is always more than one target CPA, because even a winner does not sell on every slice of spend. Randomness is real. A good ad can go quiet for a stretch just by chance, and the less it has spent, the more likely that is.
So the threshold sits at a point where a good ad would very rarely still have zero sales. Below it, zero sales is not strong evidence. Above it, zero sales is strong evidence.
If you do not know your target CPA, stop here and work it out. Every threshold in this article depends on it.
How do you judge an ad with zero sales?
An ad with zero sales is judged on spend. If it has crossed your threshold with nothing, pause it. If it is under the threshold, hold it.
This is the simplest call in media buying, and it is worth making it simple on purpose. Zero sales on meaningful spend is not a mystery to solve. It is a no.
Two refinements help:
- Check a second source. Meta can under report sales, especially with privacy changes. Before you pause, look at your third party tool (Triple Whale, Northbeam or similar) for the same ad and dates. If that tool shows new customer orders Meta missed, the ad may not be a zero at all. We cover this in depth in Meta under reporting.
- Use leading signals when you are close. If an ad is near the threshold, cost per add to cart tells you whether the funnel is filling. Healthy adds to cart at a normal cost suggest sales may be coming. No adds to cart and weak outbound CTR mean there is nothing upstream, so you do not need to wait.
How do you judge an ad that has some sales?
Once an ad has sales, spend no longer decides. Cost and return decide, against your goals. Look at both CPA and ROAS, ideally for new customers.
The reason to check both: one number alone can fool you.
- Low priced products make CPA look good. You can get cheap purchases that still do not earn back the spend.
- High priced products make ROAS look good. A single big order can make a weak ad look profitable.
So we use a simple grid:
- At goal. ROAS: At goal. Call: Keep. Check whether it is ready to scale.
- At goal. ROAS: Below goal. Call: Hold and recheck soon. One number is misleading.
- Below goal. ROAS: At goal. Call: Hold and recheck soon. Watch for one large order.
- Below goal. ROAS: Below goal. Call: It sells, just not at a good cost. Move it out of testing.
That last row matters. An ad that sells but misses goal is not trash. It is a proven converter at the wrong price. We move those ads into a separate, cost controlled campaign rather than deleting them. That is the idea behind the Graveyard.
Also watch for the large order trap. If one order is a big part of an ad's revenue, judge the ad on CPA and on its ROAS without that order. A pass that rests on one lucky basket is not a pass.
What if an ad is getting better?
Give it one more check, once. If an ad sold in the last couple of days, or its most recent days are clearly better than the days before, hold it for one more look even if the full window is below goal.
The key word is once. "Heading the right way" earns one extension. At the next check, the ad is judged like any other. Without that rule, every slight uptick becomes a reason to keep waiting, and you end up as a prisoner of hope.
Why is an Ad Set judged differently from an ad?
Because an Ad Set is a container. Its total mixes winners and losers. An Ad Set can look bad overall while one ad inside it is working well.
So we never pause an Ad Set on its aggregate alone. We reconcile the Ad Set verdict with the ad verdicts:
- Ad Set failing, every ad failing: pause the Ad Set.
- Ad Set failing, one ad passing: do not pause the Ad Set. Pause the failing ads and let the winner keep the budget.
- Ad Set passing, one ad failing: keep the Ad Set, pause the failing ad.
- Ad Set paused but its ads were passing: consider turning it back on.
There is one more question for any Ad Set that has been running for a while: is the main ad still carrying it? Most Ad Sets live on one or two ads. When those stop selling, pause, or slide below goal, ask whether another ad has stepped up with real, recent sales at goal. If yes, that ad is now carrying the Ad Set and it stays on. If no, the Ad Set has lost its reason to run. Pausing the top ads does not restart the test for the ones left behind. They are judged on the Ad Set's real age and spend.
Also check how the money split before judging the Ad Set. If the budget spread thin across many ads, most were never tested. See spread vs concentrated spend.
When should you cut budget instead of pausing?
When the Ad Set has been a proven winner at a higher budget, try a budget cut first. Pause is the last step, not the first.
Winning creative testing Ad Sets are often scaled up in place. These are not tests anymore. They are working Ad Sets carrying real budget. A few bad days on a big budget is usually a budget question, not a creative death.
Our approach in general shape:
- First bad stretch: cut the daily budget by a moderate amount and recheck after a few days.
- Still bad at the recheck: cut again and recheck.
- Still bad after repeated cuts: pause the Ad Set. It needs a break.
- Recovery at any step: hold, and once it is back at goal for a sustained stretch, raise the budget again.
Two guardrails make this work. First, a floor: below a certain daily budget, cutting further just starves the Ad Set, so you pause instead. Second, timing: Meta sets each day's delivery plan from the budget it starts the day with, so make budget changes late at night or very early, not mid day.
Do scaling campaigns use the same kill rules?
No. Scaling runs on a slower clock. Creative testing kills fast because tests are cheap and plentiful. A newly promoted ad in Scaling deserves a longer window, because it is competing against established winners and often starts slowly.
In Scaling we judge new ads over roughly two weeks, with two adaptive marks based on the campaign's own benchmark CPA:
- A concern mark: some multiple of benchmark CPA with zero sales. Watch closely, look at adds to cart, maybe trim. Not an automatic kill.
- A kill mark: a higher multiple with zero sales, or the end of the window, whichever comes first.
Also: an ad that never got enough delivery to be tested has not failed. Call it "never tested" and decide whether to restart it or release it. We go deeper on this in inside the Scaling Campaign.
What should you do after you pause?
Check back. Purchases can land days after the click, so a paused ad can pick up a late sale.
We read every paused test ad again a few days later and again about a week later, over its whole life. If a late sale shows up at goal, reopening it is on the table. If the late sale is below goal, or nothing came in, it stays off. This keeps your kill thresholds honest. If your back checks keep finding winners you paused too early, your threshold is too tight.
Key takeaways
- Build kill thresholds from your own target CPA, not from a borrowed dollar figure.
- Zero sales ads are judged on spend. Ads with sales are judged on CPA and ROAS together.
- Never pause an Ad Set on its total alone. Reconcile it with the ads inside and ask whether anything is still carrying it.
- For scaled Ad Sets, cut budget in steps before pausing, with a floor where you stop cutting.
- Scaling runs on a slower clock than testing, with concern and kill marks tied to the campaign's own benchmark.
- Back check paused ads so you learn whether your thresholds are too tight or too loose.
FAQ
How much should I spend on a Meta ad before turning it off?Enough that a good ad would rarely still have zero sales. Express it as a multiple of your target CPA. Cheaper products can be read on less spend; considered purchases need more spend and more time.
Should I turn off an ad with a good ROAS but a bad CPA?Not right away. One number alone can mislead, especially on high priced items where a single order inflates ROAS. Hold it, check for a large order, and recheck in a few days.
Is it better to pause an Ad Set or the ads inside it?Usually the ads. Pause the failing ads and keep the Ad Set running for any ad that still sells. Pause the whole Ad Set only when every ad fails or the ad carrying it has stopped working with nothing to replace it.
Why not just cut every bad Ad Set's budget instead of pausing?Cuts work for proven Ad Sets having a rough patch. They do not fix a weak test. And below a certain budget, cutting further just keeps a failing Ad Set alive on scraps. Set a floor and pause when you hit it.
How do I know if my kill threshold is right?Back check what you paused. If late sales keep turning up at goal, your threshold is too tight. If you keep holding ads that never turn, it is too loose. Scoring your past calls is the only real test.
Not sure your thresholds fit your account?
Every account's kill rules should come from its own numbers. If you would like a second opinion, our free Meta account audit includes a full account audit plus net new reach and cumulative reach reports, so you can see which ads earned their spend and which did not. Request your free audit here.
Keep reading
More on the CTSG system:
What Is the CTSG System? Creative Testing, Scaling and Graveyard for Meta Ads
How Early Can You Judge a New Meta Ad? The First Verdict Explained
Why Do Some Meta Ads Start Selling Late? Late Bloomers Explained
How to Tell if a Meta Ad Set Got a Real Test (Spread vs Concentrated Spend)
Pausing Ads vs Cleaning Up Ads in Meta: Why They Are Two Different Jobs
See every article on the CTSG system
Ready for your free Meta audit?
We will review your account and run net new reach and cumulative reach reports, free.
Check what you learned
Tap an answer to see if you got it right.
1. What should kill thresholds be built from?
2. How should you handle a scaled Ad Set that's slipping?
3. Why back check paused ads?
Ready for the full test? Take the Media Buying exam and get certified. Want this run on your account? Get my free audit.
Module 1: Media Buying · article 8 of 19
Next: Pausing Ads vs Cleaning Up Ads in Meta: Why They Are Two Different Jobs
Previous: Does Meta Under Report Conversions? When Not to Pause an Ad That Looks Bad
About the author
Jake Mehani, founder of Creative Analytics
Jake has spent 15 years running Meta and paid social ads for consumer brands. Meta published his RBX Active Advantage+ case study, he taught the DMAnc Meta and TikTok ads masterclass, and he spoke at Motion's 2024 Creative Strategy Summit. His senior team runs media buying, creative and measurement like an in house team.