How to Report Net New Reach to a Client or CEO in Plain Terms

Present a reach report in this order: why reach matters, what the report is, what looks good on the surface, the spend context, the cost per 1,000 net new reach chart, what it means, what you would do, and a short close. Define each metric once with one example, show one main chart, and save the recommendations until the problem is clear. Most reach presentations fail because they open with method instead of a reason to care.

A note on where this comes from: we did not invent these reach reports. The methods and formulas here are pulled together from Meta's own tools and documentation, reports we have seen across the industry, and other practitioners' work. We are sharing how we use them, not claiming to be the originator.

Definition

A reach report is a set of deduplicated reach numbers, like net new reach and cumulative reach, that shows whether ad spend is finding new people or reaching the same ones again.

Why do reach reports fall flat in meetings?

Because the audience does not yet care about reach when the first chart appears. A CEO thinks in revenue, CAC (customer acquisition cost) and ROAS (return on ad spend). Reach sounds like a vanity metric until someone explains why it predicts those numbers.

The fix is to sell the idea before the data. Once the room agrees that "are we reaching new people?" is a question worth asking, every chart that follows answers a question they already care about. Skip that step and the charts are just numbers.

If you need a refresher on the metric itself, see our guide to net new reach.

What order should you present a reach report in?

Use the same eight beats every time. The order matters more than the slides.

  • 1. Why it matters. What you say: Meta will always spend the budget. The question is whether it reaches new people. Rough share of time: Short
  • 2. What this is. What you say: One or two sentences on what the report covers. Rough share of time: Very short
  • 3. Surface view. What you say: Total reach looks fine, maybe even great. Rough share of time: Short
  • 4. Spend context. What you say: Spend went up by this much. Did new people go up with it?. Rough share of time: Short
  • 5. Main chart. What you say: Cost per 1,000 net new reach over time. Rough share of time: Longest
  • 6. What it means and why. What you say: The business impact, then the root causes. Rough share of time: Medium
  • 7. What we would do. What you say: Three or four specific actions. Rough share of time: Medium
  • 8. Close. What you say: The opportunity, in one or two sentences. Rough share of time: Very short

Beats 3 and 4 are the hinge. Showing that total reach looks healthy, then showing how much more it cost, is what makes the main chart land. Without that contrast, the cost chart is just a line going up.

How do you open?

Open with the reason to care, not the method. One short paragraph is enough.

Something like: "Meta will always find someone to show your ads to. What we want to know is whether the extra money is reaching new people, which grows the business, or showing ads again to people who already know you. That second kind of spend tends to show up as rising CAC and flat ROAS a few months later. So we track it as an early warning."

Then say what is coming: "I'll show you what we found, what it means and what we'd do." That roadmap keeps people listening.

How do you define the metrics without losing the room?

Define each metric once, with one real looking example, then move on. Do not explain it a second way.

A clean way to do it is with one week from your own data. Here is an invented example using a year to date view, where reach counts everyone reached since January 1:

  • Reach this week: 200,000 people saw at least one ad.
  • Year to date reach through this week: 1,500,000 unique people.
  • Year to date reach through last week: 1,420,000 unique people.
  • Net new reach this week: 1,500,000 minus 1,420,000 = 80,000 people saw your ads for the first time this year.
  • Repeats this week: 200,000 minus 80,000 = 120,000 people had already been reached this year.

Then one line: "When we pair net new reach with spend, it tells us what we pay to meet each new person." If spend that week was $40,000, cost per 1,000 net new reach is $40,000 divided by 80,000, times 1,000 = $500.

That is the whole definitions section. If you catch yourself saying "so basically what that means is," you have already explained it. Our guides to cost per 1,000 net new reach and the cumulative reach report cover the pulls behind these numbers.

How do you show the gap between what looks good and what is happening?

Show total reach first, then spend, then the cost to find new people. Keep the first part brief. Its job is to set up the contrast.

Here is an invented year over year comparison at the same point in the year:

  • Spend to date. Last year: $300,000. This year: $600,000. Change: 2x
  • Net new reach to date. Last year: 1,000,000. This year: 1,100,000. Change: Up 10%
  • Cost per 1,000 net new reach. Last year: $300. This year: $545. Change: Up about 82%

The calculation lines:

  • Last year: $300,000 divided by 1,000,000, times 1,000 = $300
  • This year: $600,000 divided by 1,100,000, times 1,000 = about $545

Say it plainly: "Spend doubled. New people went up by a tenth. The cost to meet 1,000 new people nearly doubled." Then stop and let it sit. Do not explain it three ways.

What should the main chart be?

Cost per 1,000 net new reach over time, with this year next to prior years at the same weeks. It is the one chart that ties money to audience growth, so give it the most time.

Walk it in time order: older years first as the baseline, then this year. If last year's busy season shows a spike, point to it: "This is where the trend led last year." That shows the direction without you having to argue it.

Two cautions keep you honest. Busy seasons push this cost up for everyone, so compare the same weeks year over year. And healthy costs vary by category, audience size and spend, so lead with the account's own trend.

How do you explain why it is happening?

Lead with the consequence, then the mechanism. "The budget keeps going back to the same people, because nothing in the setup pushes it toward new ones" lands better than a lecture on exclusions.

Common root causes we cover in this beat:

Pick the ones your data supports. Do not list causes you cannot show.

What plain language comparisons help?

After each technical point, add one sentence a non technical leader could repeat to their board. Use two or three in a presentation, not all of them.

  • Net new reach: "Most of the budget is paying to talk again to people already in the room, instead of bringing new people through the door."
  • Rising cost per new person: "We're paying more each month to meet the same number of new people."
  • Overlap: "It's like many fishing boats on one small lake, all chasing the same fish and driving up the price."
  • Attribution inflation: "The scoreboard counts the same goal several times because several players touched the ball."
  • Non incremental sales: "Some of these customers would have bought anyway. The ad was just in the room when they walked in."

How should recommendations sound?

Specific enough that someone could go do them tomorrow. Three or four actions, one sentence of reason each.

For example: consolidate overlapping Ad Sets, tighten exclusions in testing so it runs to cold audiences, shift budget away from warm campaigns that cannot prove they are incremental, brief new creative built for strangers, and run a Conversion Lift test to get a true baseline. Close the section with one clear statement, not a pile of caveats. The data earned it.

How is a recorded walkthrough different from a live call?

The order stays the same. The delivery changes.

  • Length. Recorded walkthrough: Short. A few minutes. Reach the recommendations before attention drops. Live call: Longer, but do not use the time just because you have it.
  • Opening. Recorded walkthrough: Hook in the first few seconds or they close the tab. Live call: A little more room to set context.
  • Questions. Recorded walkthrough: None, so keep momentum. No pauses that feel like dead air. Live call: Ask short questions at the breaks.
  • Adapting. Recorded walkthrough: You cannot read the room. Live call: Spend more time where people react.

On a live call, a few questions at natural breaks help the room own the finding. After the opening: "As spend has grown, has it felt like results kept pace?" After the main chart: "Does this match what you've been feeling?" When the client starts explaining the problem back to you, they understand it.

What if there is already a team running the account?

Frame the findings as structural, not personal. People hired that team, so criticizing the team criticizes the decision maker in the room.

Language that works: "The ads themselves may be fine. The structure underneath keeps sending budget to the same people whatever creative runs."

What mistakes ruin a reach presentation?

Most of them come from saying too much.

  • Starting with method. Why it hurts: They tune out before they care. Fix: Open with why reach matters
  • Explaining a metric again later. Why it hurts: Pads time and sounds unsure. Fix: Trust the definitions beat
  • Saying the same point several ways. Why it hurts: Dilutes it. Fix: Say it once, then pause
  • Defending your filters unprompted. Why it hurts: Sounds defensive. Fix: State the scope and move on
  • Filler words. Why it hurts: They add up to minutes. Fix: Pause instead
  • A soft close ("just a first look"). Why it hurts: Undercuts everything before it. Fix: End on what you would do and an offer to help

What should you have ready before you present?

  1. Spend to date for this year and the same point last year.
  2. Total reach and net new reach for the same periods.
  3. Cost per 1,000 net new reach over time, by week or month, for each year.
  4. One example week for the definitions beat.
  5. Any big changes in the period (budget cuts, launches, restructures) so you can explain sudden drops.
  6. Supporting evidence for each root cause you plan to name.
  7. Your three or four recommendations, written as actions.

Every claim you make should point back to one of those numbers.

Key takeaways

  • Sell why reach matters before showing any data.
  • Follow the same order every time: why, what, surface view, spend context, main chart, meaning, actions, close.
  • Define each metric once with one example, then do not explain it again.
  • Make cost per 1,000 net new reach the main chart and compare the same weeks year over year.
  • Lead root causes with the consequence, and only name causes your data shows.
  • Keep recordings short, ask a few questions on live calls, and never blame the incumbent team.

FAQ

How long should a reach presentation be? A recorded walkthrough should be a few minutes. A full live audit that adds overlap, attribution and incrementality can run longer, but every section should earn its time.

Should I show the spreadsheet? Briefly, to show the numbers are real. Then move to charts. Nobody follows a spreadsheet on a screen share.

What if the client asks about benchmarks? Give context but lead with their own trend. Healthy ranges vary widely by category, audience size and spend, and the account's own direction over time is harder to argue with.

Should I include net new reach percentage too? Only if it adds something. In most presentations, cost per 1,000 net new reach tells the same story more clearly, and fewer metrics keep the room focused. Our guide to net new reach percentage covers when it helps.

How do I report incremental reach to a client in plain terms?Say it as a sentence about people: how many people saw your ads for the first time this month, how that compares with last month, and what each new person cost.

Want a reach report you can walk through?

If you want to see what your own reach data says, we offer a free Meta account audit. It includes a full account audit plus net new reach and cumulative reach reports, and we will walk you through the findings. Request yours here.

Keep reading

More on reach reports:

See every reach report article

Ready for your free Meta audit?

We will review your account and run net new reach and cumulative reach reports, free.

Get your free audit

Check what you learned

Tap an answer to see if you got it right.

1. What should you do before showing any data?

If they don't care why reach matters, the data won't land.

2. What should the main chart be?

It shows what growth costs and how it's changing.

3. What mistake ruins a reach presentation?

Never blame the incumbent team. Lead with the consequence and only name causes your data shows.

Ready for the full test? Take the Reach Reports exam and get certified. Want this run on your account? Get my free audit.

About the author

Jake Mehani, founder of Creative Analytics

Jake has spent 15 years running Meta and paid social ads for consumer brands. Meta published his RBX Active Advantage+ case study, he taught the DMAnc Meta and TikTok ads masterclass, and he spoke at Motion's 2024 Creative Strategy Summit. His senior team runs media buying, creative and measurement like an in house team.

Jake on LinkedIn  |  Case studies  |  Free Meta audit

Previous
Previous

How to Use Reach Data to Spot Attribution Inflation on Meta

Next
Next

How to Write a Direct Response Facebook Ad Script: the Script Vibe System